# Fronius 222: Grid voltage L1/N below admissible limits

**Series:** Fronius IG / IG Plus (IG 15-60, IG 2000/3000/4000/5100) grid-tied inverters

**Meaning:** The phase L1-to-neutral grid voltage is too low; the inverter resumes when it returns to range.

## Likely causes
- Low L1/N grid voltage

## Checks
- Check grid voltage; contact the electrical contractor if it persists

## Parts implicated
none

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: grid_tie

## Provenance
- [manual] p. 84 — "Grid voltage (L1/N) below admissible limits" — https://www.fronius.com/~/downloads/Solar%20Energy/Operating%20Instructions/42,0410,1089.pdf (retrieved 2026-11-21)

- Confidence: verified
- Verified by: manual
- Requires qualified installer: yes
