# Fronius 412: Fixed voltage selected instead of MPP operation

**Series:** Fronius IG / IG Plus (IG 15-60, IG 2000/3000/4000/5100) grid-tied inverters

**Meaning:** The inverter is configured for fixed-voltage operation instead of MPP voltage operation, which can conflict with the installation.

## Likely causes
- Wrong operating-mode setting (fixed voltage vs MPP)

## Checks
- Check the operating-mode setting against the installation

## Parts implicated
none

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: none

## Provenance
- [manual] p. 88 — "The "fixed voltage" setting has been selected instead of MPP voltage operation and the voltage is set to too low a value, or DC voltage exceeds allowable limits." — https://www.fronius.com/~/downloads/Solar%20Energy/Operating%20Instructions/42,0410,1089.pdf (retrieved 2026-11-21)

- Confidence: vendor
- Verified by: manual
- Requires qualified installer: yes
