# Fronius 425: Communication with power stage set not possible

**Series:** Fronius IG / IG Plus (IG 15-60, IG 2000/3000/4000/5100) grid-tied inverters

**Meaning:** The operating interface cannot communicate with the power stage set; the inverter stops feeding.

## Likely causes
- Power stage set communication fault

## Checks
- Contact a Fronius-trained technician if it persists

## Parts implicated
none

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: grid_tie

## Provenance
- [manual] p. 89 — "Communication with the power stage set is not possible" — https://www.fronius.com/~/downloads/Solar%20Energy/Operating%20Instructions/42,0410,1089.pdf (retrieved 2026-11-21)

- Confidence: verified
- Verified by: manual
- Requires qualified installer: yes
