# Growatt 08: Bus voltage is too high

**Series:** Growatt SPF 3500/5000 ES off-grid solar inverter

**Meaning:** The internal DC bus voltage is too high.

## Likely causes
- Li battery charge voltage points set too high (programs 19/21)
- Internal fault

## Checks
- If using a Li battery without communication, check the voltage points of programs 19 and 21
- Restart the unit; if the error recurs, return to a repair centre

## Parts implicated
DC bus, battery

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: dc_arc, dc_bus, lithium_battery

## Provenance
- [manual] p. 40 — "Bus voltage is too high. — If you connect to a lithium battery without communication, check whether the voltage points of the program 19 and 21 are too high. Restart the unit, if the error happens again, please return to repair center." — https://en.growatt.com/upload/file/SPF_3500-5000_ES_User_Manual_EN_202109.pdf (retrieved 2026-11-21)

- Confidence: verified
- Verified by: manual
- Requires qualified installer: yes
