# SMA 302: Temperature AC voltage - power limited by high grid voltage

**Series:** SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)

**Meaning:** The inverter has deliberately reduced its power output because the grid voltage is too high, in order to help grid stability. SMA advises watching how often the grid voltage fluctuates and, if the message recurs often, asking the grid operator to approve a change of the inverter's operating parameters before discussing it with SMA Service.

## Likely causes
- Grid voltage close to or above the permissible range
- Frequent grid voltage fluctuations at the connection point

## Checks
- Check the grid voltage and observe how often fluctuations occur
- If the message appears often, ask the grid operator to approve a change of the operating parameters
- Discuss any approved parameter change with SMA Service

## Parts implicated
grid connection

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: grid_tie

## Provenance
- [manual] p. 84 — "Explanation: The inverter has reduced its power due to a too-high grid voltage to ensure grid stability." — https://files.sma.de/downloads/STP3-6-3AV-40-BE-en-22.pdf (retrieved 2026-11-21)

- Confidence: verified
- Verified by: manual
- Requires qualified installer: yes
