# SMA 3303: Unstable operation

**Series:** SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)

**Meaning:** There is not enough power at the DC input for stable operation, so the inverter cannot connect to the utility grid. SMA's measures are to check that the PV array is correctly designed and free of errors and that it is not covered by snow or otherwise shaded.

## Likely causes
- PV array too small or too lightly irradiated for stable operation
- Snow cover or shading on the PV array
- Fault in the PV array or its wiring

## Checks
- Ensure that the PV array is designed correctly
- Ensure that the PV array is not covered by snow or otherwise shaded
- Ensure that the PV array is free of errors

## Parts implicated
PV modules, DC cabling

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: pv_dc

## Provenance
- [manual] p. 89 — "Explanation: There is not enough power at the DC input of the inverter for stable operation. The inverter cannot connect to the utility grid." — https://files.sma.de/downloads/STP3-6-3AV-40-BE-en-22.pdf (retrieved 2026-11-21)

- Confidence: verified
- Verified by: manual
- Requires qualified installer: yes
