# SMA 3701: Residual current too high - check generator

**Series:** SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)

**Meaning:** The inverter has detected a residual current caused by the brief grounding of the PV module, which points at an insulation fault on the array. SMA's measure is to check the PV system for ground faults.

## Likely causes
- Insulation fault to earth in the PV array
- Damaged DC cable or connector
- Moisture path from the array to earth

## Checks
- Check the PV system for ground faults
- Isolate strings one at a time to locate the leaking string
- Have the faulty string repaired before it is reconnected

## Parts implicated
PV modules, DC cabling, RCD

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: dc_arc, pv_dc, grid_tie

## Provenance
- [manual] p. 90 — "Explanation: The inverter has detected a residual current through brief grounding of the PV module." — https://files.sma.de/downloads/STP3-6-3AV-40-BE-en-22.pdf (retrieved 2026-11-21)

- Confidence: verified
- Verified by: manual
- Requires qualified installer: yes
