# SMA 501: Grid incident - grid frequency out of range

**Series:** SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)

**Meaning:** The grid frequency is outside the permissible range, so the inverter has disconnected from the utility grid. SMA's corrective measures are to check the grid frequency and how often it fluctuates and, if the message recurs, to obtain the grid operator's approval for a change of the operating parameters.

## Likely causes
- Grid frequency outside the permissible range
- Frequent frequency fluctuations on a weak grid

## Checks
- Check the grid frequency and observe how often fluctuations occur
- If the message appears often, ask the grid operator to approve a change of the operating parameters
- Discuss any approved change with SMA Service

## Parts implicated
grid connection

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: grid_tie

## Provenance
- [manual] p. 86 — "Explanation: The grid frequency is not within the permissible range. The inverter has disconnected from the utility grid." — https://files.sma.de/downloads/STP3-6-3AV-40-BE-en-22.pdf (retrieved 2026-11-21)

- Confidence: verified
- Verified by: manual
- Requires qualified installer: yes
