# SMA 6604: Self-diagnosis - overcurrent grid / overvoltage intermediate circuit

**Series:** SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)

**Meaning:** Event 6603 is 'Self-diagnosis / Overcurrent grid' and event 6604 is 'Self-diagnosis / Overvoltage intermediate circuit (SW)'. For both, SMA states that the cause must be determined by the Service and lists no field repair beyond contacting Service.

## Likely causes
- Internal hardware fault in the power stage
- DC-link (intermediate circuit) overvoltage inside the inverter

## Checks
- Note the event number and the inverter serial number
- Contact SMA Service; do not open the inverter

## Parts implicated
inverter

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: none

## Provenance
- [manual] p. 94 — "Explanation: The cause must be determined by the Service." — https://files.sma.de/downloads/STP3-6-3AV-40-BE-en-22.pdf (retrieved 2026-11-21)

- Confidence: verified
- Verified by: manual
- Requires qualified installer: no
