# SMA 9003: Grid parameter locked

**Series:** SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)

**Meaning:** Changes to the grid parameters are now blocked; from this point on the installer must log in with the SMA Grid Guard code before any grid parameter can be changed. This is a status message, not a fault.

## Likely causes
- Grid parameters have been locked after a parameter change
- Installer logged in without the Grid Guard code

## Checks
- Log in with the SMA Grid Guard code before changing grid parameters
- No repair is required if no grid parameter change is intended

## Parts implicated
none

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: none

## Provenance
- [manual] p. 99 — "Explanation: Changes to the grid parameters are now blocked. In order to be able to make changes to the grid parameters, from now on you must log in using the SMA Grid Guard code." — https://files.sma.de/downloads/STP3-6-3AV-40-BE-en-22.pdf (retrieved 2026-11-21)

- Confidence: verified
- Verified by: manual
- Requires qualified installer: no
