# SMA 9007: Abort self-test

**Series:** SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)

**Meaning:** The self-test that the inverter runs as part of the grid-connection configuration was terminated before it completed. SMA asks for the AC connection to be checked for correctness and for the self-test to be restarted.

## Likely causes
- Self-test interrupted by the installer
- AC connection not correct, so the test could not complete

## Checks
- Ensure that the AC connection is correct
- Restart the self-test

## Parts implicated
AC wiring

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: grid_tie

## Provenance
- [manual] p. 99 — "Explanation: The self-test was terminated." — https://files.sma.de/downloads/STP3-6-3AV-40-BE-en-22.pdf (retrieved 2026-11-21)

- Confidence: verified
- Verified by: manual
- Requires qualified installer: yes
