# SMA 901: PE connection missing - check connection

**Series:** SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)

**Meaning:** The inverter reports that the grounding conductor is not correctly connected, so the protective earth path it relies on is absent. The manual's single corrective measure is to ensure that the grounding conductor is correctly connected before the inverter is put back into service.

## Likely causes
- Protective earth conductor not landed on the inverter
- Loose, broken or missing PE conductor in the AC cable

## Checks
- Isolate the inverter from voltage sources
- Ensure that the grounding conductor is correctly connected
- Verify PE continuity to the installation's earthing point before re-energising

## Parts implicated
AC wiring, protective earth

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: grid_tie

## Provenance
- [manual] p. 87 — "Explanation: The grounding conductor is not correctly connected." — https://files.sma.de/downloads/STP3-6-3AV-40-BE-en-22.pdf (retrieved 2026-11-21)

- Confidence: verified
- Verified by: manual
- Requires qualified installer: yes
