# SolarEdge 8x58: Isolation fault (three-phase)

**Series:** SolarEdge single-phase and three-phase inverters (Europe & APAC)

**Meaning:** Three-phase inverters report the isolation fault as code 8x58. The PV array is not properly isolated from earth; check the installation for isolation problems and ground leakage, and have a certified installer fix the string.

## Likely causes
- Damaged module insulation
- Damaged DC string cable or connector
- Moisture or soiling leakage path

## Checks
- Check the PV installation for isolation problems and ground leakage
- Isolate strings one at a time to locate the fault
- Only a certified PV installer may repair and reconnect the faulty string

## Parts implicated
PV modules, DC cabling

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: dc_arc, grid_tie, pv_dc

## Provenance
- [manual] p. 3 — "Isolation Fault PV solar array is not properly isolated from ground earth." — https://web.archive.org/web/20230202122919/https://knowledge-center.solaredge.com/sites/kc/files/se-inverter-installation-guide-error-codes.pdf (retrieved 2026-11-21)

- Confidence: verified
- Verified by: manual
- Requires qualified installer: yes
