# Victron Err 1: Battery temperature too high

**Series:** Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

**Meaning:** The charger has stopped charging because the battery temperature is above the safe limit, to prevent battery damage. The temperature comes from an external sensor (Smart Battery Sense or BMV) or from the charger's own measurement.

## Likely causes
- Battery operating above its safe temperature range
- Faulty or misplaced temperature sensor

## Checks
- Confirm the battery temperature reading in VictronConnect and let the battery cool
- Check that the temperature sensor is correctly placed and connected

## Parts implicated
temperature sensor, battery

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: lithium_battery

## Provenance
- [vendor_kb] § Err 1 - Battery temperature too high — "This error will auto-reset after the battery temperature has dropped." — https://www.victronenergy.com/live/mppt-error-codes (retrieved 2026-11-21)

- Confidence: verified
- Verified by: vendor_kb
- Requires qualified installer: yes
