# Victron Err 117: Incompatible firmware

**Series:** Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

**Meaning:** A firmware update did not complete, leaving the device only partially updated.

## Likely causes
- Interrupted over-the-air update
- Cable disconnected or power lost during update
- Device out of range during update

## Checks
- Retry the firmware update with the correct firmware file for the device

## Parts implicated
firmware

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: none

## Provenance
- [vendor_kb] § Err 117 - Incompatible firmware — "This error indicates that a firmware update did not complete, so the device is only partially updated." — https://www.victronenergy.com/live/mppt-error-codes (retrieved 2026-11-21)

- Confidence: vendor
- Verified by: vendor_kb
- Requires qualified installer: no
