# Victron Err 119: Settings data lost

**Series:** Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

**Meaning:** The charger cannot read its configuration and has stopped. It does not auto-reset; restore defaults and reconfigure.

## Likely causes
- Corrupted configuration data

## Checks
- Restore factory defaults in VictronConnect
- Isolate all power, wait 3 minutes, repower, then reconfigure
- Report the event to the dealer

## Parts implicated
charge controller

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: none

## Provenance
- [vendor_kb] § Err 119 - Settings data lost — "The charger cannot read its configuration, and stopped." — https://www.victronenergy.com/live/mppt-error-codes (retrieved 2026-11-21)

- Confidence: vendor
- Verified by: vendor_kb
- Requires qualified installer: yes
