# Victron Err 14: Battery low temperature

**Series:** Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

**Meaning:** Charging has stopped to avoid charging lithium (LiFePO4) cells at low temperature, which damages them.

## Likely causes
- Battery below its minimum charge temperature

## Checks
- Confirm battery temperature and allow it to warm before charging
- Check the low-temperature cut-off setting

## Parts implicated
battery

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: lithium_battery

## Provenance
- [vendor_kb] § Err 14 - Battery low temperature — "The charger is stopped to avoid charging LiFePO4 batteries at low temperature as this damages the cells." — https://www.victronenergy.com/live/mppt-error-codes (retrieved 2026-11-21)

- Confidence: verified
- Verified by: vendor_kb
- Requires qualified installer: yes
