# Victron Err 200: Internal DC voltage error

**Series:** Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

**Meaning:** An internal DC-DC converter diagnostic failed. It does not auto-reset; persistent failure indicates a faulty unit.

## Likely causes
- Faulty internal DC-DC converter

## Checks
- Restart the unit with the power switch
- Replace the unit if the error persists

## Parts implicated
DC-DC converter

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: dc_arc

## Provenance
- [vendor_kb] § Err 200 - Internal DC voltage error — "The unit performs internal diagnostics when activating its internal DC-DC converter." — https://www.victronenergy.com/live/mppt-error-codes (retrieved 2026-11-21)

- Confidence: verified
- Verified by: vendor_kb
- Requires qualified installer: yes
