# Victron Err 201: Internal DC voltage measurement error

**Series:** Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

**Meaning:** An internal (high-)voltage measurement did not match criteria. On MPPT RS/Inverter RS/Multi RS, update firmware first — limits were too strict in older versions and could trigger falsely at MPPT start/stop.

## Likely causes
- Firmware older than v1.08 (false triggers)
- Broken internal measurement circuit

## Checks
- Update firmware to v1.08 or newer
- Restart with the power switch
- Send for repair if it persists

## Parts implicated
measurement circuit

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: dc_arc, pv_dc

## Provenance
- [vendor_kb] § Err 201 - Internal DC voltage error — "Applies to the MPPT RS, Inverter RS and Multi RS." — https://www.victronenergy.com/live/mppt-error-codes (retrieved 2026-11-21)

- Confidence: vendor
- Verified by: vendor_kb
- Requires qualified installer: yes
