# Victron Err 202: Internal GFCI sensor error

**Series:** Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

**Meaning:** The residual-current (GFCI) sensor failed its internal self-test. It does not auto-reset; persistent failure requires repair/replacement.

## Likely causes
- Faulty GFCI sensor

## Checks
- Restart the unit with the power switch
- Send for repair/replacement if it persists

## Parts implicated
GFCI sensor

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: dc_arc

## Provenance
- [vendor_kb] § Err 202 - Internal GFCI sensor error — "The sensor used to measure residual current did not pass the internal self test." — https://www.victronenergy.com/live/mppt-error-codes (retrieved 2026-11-21)

- Confidence: verified
- Verified by: vendor_kb
- Requires qualified installer: yes
