# Victron Err 24: Fan failure

**Series:** Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

**Meaning:** The fan is powered but the circuit measures no current draw, indicating a broken or obstructed fan. Applies to Skylla-IP44/IP65 chargers.

## Likely causes
- Broken or obstructed fan
- Fan wiring fault

## Checks
- Check the fan for obstruction and confirm it spins
- Contact the dealer if the fan does not run

## Parts implicated
fan

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: none

## Provenance
- [vendor_kb] § Err 24 - Fan failure — "This error indicates that the fan is powered on but the circuit does not measure any current draw by the fan." — https://www.victronenergy.com/live/mppt-error-codes (retrieved 2026-11-21)

- Confidence: verified
- Verified by: vendor_kb
- Requires qualified installer: yes
