# Victron Err 26: Terminal overheated

**Series:** Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

**Meaning:** The power terminals have overheated; the error auto-resets after cooling. Usually a wiring issue at the terminals.

## Likely causes
- Undersized or wrong-type wiring
- Loose terminal bolts

## Checks
- Check wiring type and strand size against the manual
- Tighten terminal bolts (isolated) and confirm the error clears

## Parts implicated
power terminals, wiring

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: none

## Provenance
- [vendor_kb] § Err 26 - Terminal overheated — "Power terminals overheated, check wiring, including the wiring type and type of strands, and/or fasten bolts if possible. This error will auto-reset." — https://www.victronenergy.com/live/mppt-error-codes (retrieved 2026-11-21)

- Confidence: verified
- Verified by: vendor_kb
- Requires qualified installer: yes
