# Victron Err 52: Inverter peak current

**Series:** Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

**Meaning:** The inverter hit its peak current limit; output voltage drops to limit current and it shuts down if the trip level is continuously exceeded.

## Likely causes
- Loads with high inrush current
- Excessive AC load

## Checks
- Reduce the AC load
- Restart the inverter if it locked out

## Parts implicated
AC loads

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: none

## Provenance
- [vendor_kb] § Err 50, Err 52 - Inverter overload, Inverter peak current — "Some loads like motors or pumps draw large inrush currents in a start-up situation." — https://www.victronenergy.com/live/mppt-error-codes (retrieved 2026-11-21)

- Confidence: verified
- Verified by: vendor_kb
- Requires qualified installer: yes
