# Victron Err 59: ACIN1 relay test fault

**Series:** Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

**Meaning:** The automatic check of the AC input disconnect relay failed, usually a broken (sticky) relay in the AC input stage.

## Likely causes
- Broken/sticky AC input relay

## Checks
- Contact the dealer for repair or replacement

## Parts implicated
AC input relay

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: grid_tie

## Provenance
- [vendor_kb] § Err 59 - ACIN1 relay test fault — "Automatic checking of the disconnect means failure. This usually indicates a broken relay (sticky contact) in the AC input stage." — https://www.victronenergy.com/live/mppt-error-codes (retrieved 2026-11-21)

- Confidence: verified
- Verified by: vendor_kb
- Requires qualified installer: yes
