# Victron Err 6: Remote battery voltage sense failure

**Series:** Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

**Meaning:** The remote battery voltage sense input is invalid, most commonly because the V-sense connector is wired in reverse polarity.

## Likely causes
- V-sense connector wired with reversed polarity
- Faulty sense wiring

## Checks
- Check the V-sense connector polarity against the battery terminals
- Reconnect and confirm the reading

## Parts implicated
voltage sense wiring

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: lithium_battery

## Provenance
- [vendor_kb] § Err 6, Err 7 - Remote battery voltage sense failure — "Check if the V-sense connector is properly connected to the battery terminals. Most likely cause: the remote V-sense connector is connected in reverse polarity to the BAT+ or BAT- terminals." — https://www.victronenergy.com/live/mppt-error-codes (retrieved 2026-11-21)

- Confidence: verified
- Verified by: vendor_kb
- Requires qualified installer: yes
