# Victron Err 67: BMS connection lost

**Series:** Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

**Meaning:** The charger is configured to be controlled by a BMS but is not receiving BMS messages, so it reduces output to the battery base voltage as a safety measure.

## Likely causes
- Disconnected or faulty BMS communication cable
- BMS switched off or faulty

## Checks
- Check the connection between the charger and the BMS
- Reconfigure to standalone mode if the charger is no longer used with a BMS

## Parts implicated
BMS, communication cable

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: lithium_battery

## Provenance
- [vendor_kb] § Err 67 - BMS Connection lost — "This error shows when the charger is configured to be controlled by a BMS, but does not receive any BMS control messages." — https://www.victronenergy.com/live/mppt-error-codes (retrieved 2026-11-21)

- Confidence: verified
- Verified by: vendor_kb
- Requires qualified installer: yes
