# Victron Err 8: Remote battery voltage sense failure (connection lost)

**Series:** Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

**Meaning:** The charger has lost connection to the remote battery voltage sense it was previously reading.

## Likely causes
- Loose or disconnected V-sense wiring

## Checks
- Check the V-sense connector is properly connected to the battery terminals

## Parts implicated
voltage sense wiring

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: lithium_battery

## Provenance
- [vendor_kb] § Err 8 - Remote battery voltage sense failure (connection lost) — "Check if the V-sense connector is properly connected to the battery terminals." — https://www.victronenergy.com/live/mppt-error-codes (retrieved 2026-11-21)

- Confidence: verified
- Verified by: vendor_kb
- Requires qualified installer: no
