# Victron Info 65: Communication warning (parallel controller)

**Series:** Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

**Meaning:** Communication with one of the paralleled controllers was lost; this is a warning, not a fault. Clear it by switching the controller off and back on.

## Likely causes
- Lost communication between parallel controllers

## Checks
- Switch the affected controller off and back on to clear the warning

## Parts implicated
none

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: none

## Provenance
- [vendor_kb] § Information 65 - Communication warning — "Communication with one of the paralleled controllers was lost. To clear the warning, switch the controller off and back on" — https://www.victronenergy.com/live/mppt-error-codes (retrieved 2026-11-21)

- Confidence: vendor
- Verified by: vendor_kb
- Requires qualified installer: no
