# Victron VE.Bus Error 10: System time synchronisation problem

**Series:** Victron MultiPlus / Quattro / MultiPlus-II / EasySolar-II (VE.Bus inverter/charger)

**Meaning:** A time synchronisation problem, typically transient during system restart; often follows Error 1.

## Likely causes
- Transient during restart
- Blown DC fuse on one or more units (mains fails)

## Checks
- Ignore if only seen during restart
- Check DC fuses on all units

## Parts implicated
DC fuse

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: dc_bus

## Provenance
- [vendor_kb] § Error 10 - System time synchronisation problem — "This typically happens during a system restart, and is then not a real error; no need to investigate." — https://www.victronenergy.com/live/ve.bus:ve.bus_error_codes (retrieved 2026-11-21)

- Confidence: verified
- Verified by: vendor_kb
- Requires qualified installer: no
