# Victron VE.Bus Error 128: Connect prevented by failing relay test

**Series:** Victron MultiPlus / Quattro / MultiPlus-II / EasySolar-II (VE.Bus inverter/charger)

**Meaning:** On a Quattro-II with a grid code selected, the backfeed relay test kept failing for more than 5 minutes, so it cannot connect to the grid.

## Likely causes
- Repeatedly failing backfeed relay test

## Checks
- Check the installation wiring and earthing per the grid code
- Contact the dealer if the relay test keeps failing

## Parts implicated
backfeed relay

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: dc_bus, grid_tie

## Provenance
- [vendor_kb] § Error 128 - Connect prevented by failing relay test — "Relay test that keeps failing for more than 5 minutes, If a grid code is selected in VEConfigure, on a Quattro-II the backfeed relays are tested every time before connecting to the mains." — https://www.victronenergy.com/live/ve.bus:ve.bus_error_codes (retrieved 2026-11-21)

- Confidence: verified
- Verified by: vendor_kb
- Requires qualified installer: yes
