# Victron VE.Bus Error 18: AC over-voltage on switched-off slave output

**Series:** Victron MultiPlus / Quattro / MultiPlus-II / EasySolar-II (VE.Bus inverter/charger)

**Meaning:** AC voltage is present on a slave's AC output while it is switched off; there can never be voltage there, so the AC wires are likely swapped.

## Likely causes
- AC wires swapped by accident

## Checks
- Check the AC wiring for swapped connections

## Parts implicated
AC wiring

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: dc_bus, grid_tie

## Provenance
- [vendor_kb] § Error 18 - AC Over-voltage on the output of a slave while switched off — "Solution: check if AC wires are not swapped by accident. There can never be voltage on the AC out when a unit is switched off. Recovery: system remains off until restarted." — https://www.victronenergy.com/live/ve.bus:ve.bus_error_codes (retrieved 2026-11-21)

- Confidence: verified
- Verified by: vendor_kb
- Requires qualified installer: yes
