# Victron VE.Bus Error 4: No other device found

**Series:** Victron MultiPlus / Quattro / MultiPlus-II / EasySolar-II (VE.Bus inverter/charger)

**Meaning:** The master is configured for a parallel/split/three-phase system but cannot find other devices. It can appear temporarily during restart.

## Likely causes
- Temporary during system restart
- Faulty communication cabling

## Checks
- Ignore if only seen during restart
- Check communication cables (use factory patch leads)

## Parts implicated
VE.Bus cabling

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: dc_bus, grid_tie

## Provenance
- [vendor_kb] § Error 4 - No other device found — "The master device is configured to run in a parallel-, split- and/or three-phase system, but cannot find other devices on the bus." — https://www.victronenergy.com/live/ve.bus:ve.bus_error_codes (retrieved 2026-11-21)

- Confidence: verified
- Verified by: vendor_kb
- Requires qualified installer: no
