# Victron VE.Bus Error 5: Overvoltage on AC out

**Series:** Victron MultiPlus / Quattro / MultiPlus-II / EasySolar-II (VE.Bus inverter/charger)

**Meaning:** Overvoltage on the AC output, typically because a slave unit's AC wiring is not connected properly or at all.

## Likely causes
- Slave AC wiring not connected properly or missing

## Checks
- Check the AC wiring of the slave units

## Parts implicated
AC-out wiring

## Safety
Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. This page is a diagnostic reference, not step-by-step work instructions. Isolate and verify de-energised before any physical check, and escalate to a qualified installer/electrician for anything beyond reading the display or checking a connector on isolated equipment.

Safety flags: dc_bus, grid_tie

## Provenance
- [vendor_kb] § Error 5 - Overvoltage on AC out — "This problem can occur when the AC wiring of one of the slave units is not connected properly, or not connected at all. Check the AC wiring. Recovery: auto-restart once the error is gone." — https://www.victronenergy.com/live/ve.bus:ve.bus_error_codes (retrieved 2026-11-21)

- Confidence: verified
- Verified by: vendor_kb
- Requires qualified installer: yes
