Fronius IG / IG Plus (IG 15-60, IG 2000/3000/4000/5100) grid-tied inverters
Fronius 302: Overcurrent (DC)
Quick answerFronius 302 means A short interruption of power feeding into the grid due to DC overcurrent; the inverter returns to the startup phase..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
A short interruption of power feeding into the grid due to DC overcurrent; the inverter returns to the startup phase.
Likely causes
- DC-side overcurrent event
What to check
- The fault is usually rectified automatically; contact the installer if it keeps recurring
Parts implicated
None listed
Sources (verbatim):
- https://www.fronius.com/~/downloads/Solar%20Energy/Operating%20Instructions/42,0410,1089.pdf (manual, retrieved 2026-11-21) p. 85
“Overcurrent (DC)”
Paraphrased; verify against the manual for your exact model and serial number.