Fronius IG / IG Plus (IG 15-60, IG 2000/3000/4000/5100) grid-tied inverters
Fronius 412: Fixed voltage selected instead of MPP operation
Quick answerFronius 412 means The inverter is configured for fixed-voltage operation instead of MPP voltage operation, which can conflict with the installation..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
The inverter is configured for fixed-voltage operation instead of MPP voltage operation, which can conflict with the installation.
Likely causes
- Wrong operating-mode setting (fixed voltage vs MPP)
What to check
- Check the operating-mode setting against the installation
Parts implicated
None listed
Sources (verbatim):
- https://www.fronius.com/~/downloads/Solar%20Energy/Operating%20Instructions/42,0410,1089.pdf (manual, retrieved 2026-11-21) p. 88
“The "fixed voltage" setting has been selected instead of MPP voltage operation and the voltage is set to too low a value, or DC voltage exceeds allowable limits.”
Paraphrased; verify against the manual for your exact model and serial number.