Fronius IG / IG Plus (IG 15-60, IG 2000/3000/4000/5100) grid-tied inverters
Fronius 515: Faulty plug connections
Quick answerFronius 515 means The DC/AC or DC/DC temperature sensor is faulty, or the service jumper is not connected..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
The DC/AC or DC/DC temperature sensor is faulty, or the service jumper is not connected.
Likely causes
- Faulty temperature sensor plug
- Service jumper on wrong position
What to check
- Check plug-in connections; contact a Fronius-trained technician if it persists
Parts implicated
None listed
Sources (verbatim):
- https://www.fronius.com/~/downloads/Solar%20Energy/Operating%20Instructions/42,0410,1089.pdf (manual, retrieved 2026-11-21) p. 92
“Faulty plug connections”
Paraphrased; verify against the manual for your exact model and serial number.