Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)

SMA 3303: Unstable operation

confidence: verifiedchecked 2026-11-21
Quick answerSMA 3303 means There is not enough power at the DC input for stable operation, so the inverter cannot connect to the utility grid. SMA's measures are to check that the PV array is correctly designed and free of errors and that it is not covered by snow or otherwise shaded..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

There is not enough power at the DC input for stable operation, so the inverter cannot connect to the utility grid. SMA's measures are to check that the PV array is correctly designed and free of errors and that it is not covered by snow or otherwise shaded.

Likely causes

  • PV array too small or too lightly irradiated for stable operation
  • Snow cover or shading on the PV array
  • Fault in the PV array or its wiring

What to check

  1. Ensure that the PV array is designed correctly
  2. Ensure that the PV array is not covered by snow or otherwise shaded
  3. Ensure that the PV array is free of errors

Parts implicated

PV modulesDC cabling
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.