Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)

SMA 3501: Insulation failure - check generator

confidence: verifiedchecked 2026-11-21
Quick answerSMA 3501 means The inverter has detected a ground fault in the PV module, meaning the insulation from the array to earth is defective or insufficient. SMA's measure is to check the PV system for ground faults before the array is returned to service; the manual's dedicated section 11.3 covers the procedure and warns of lethal shock risk from parts that stay live during a ground fault..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

The inverter has detected a ground fault in the PV module, meaning the insulation from the array to earth is defective or insufficient. SMA's measure is to check the PV system for ground faults before the array is returned to service; the manual's dedicated section 11.3 covers the procedure and warns of lethal shock risk from parts that stay live during a ground fault.

Likely causes

  • Damaged module insulation or backsheet
  • Damaged DC cable, connector or junction box
  • Water ingress or soiling forming a leakage path to earth

What to check

  1. Disconnect the product from voltage sources and ensure it cannot be reconnected
  2. Check the PV system for ground faults, string by string, with an insulation tester
  3. Do not reconnect a faulty string until it has been repaired

Parts implicated

PV modulesDC cabling
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.