Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)

SMA 3601: High leakage current - check generator

confidence: verifiedchecked 2026-11-21
Quick answerSMA 3601 means The leakage current of the inverter and the PV module is too high: there is a ground fault, a residual current or a malfunction. The inverter interrupts feed-in operation immediately after the threshold is exceeded and reconnects automatically once the fault is cleared; SMA's measure is to check the PV system for ground faults..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

The leakage current of the inverter and the PV module is too high: there is a ground fault, a residual current or a malfunction. The inverter interrupts feed-in operation immediately after the threshold is exceeded and reconnects automatically once the fault is cleared; SMA's measure is to check the PV system for ground faults.

Likely causes

  • Ground fault in the PV array
  • Residual current through damaged insulation
  • Malfunction in the inverter's residual-current monitoring

What to check

  1. Disconnect the inverter from voltage sources before working on the array
  2. Check the PV system for ground faults
  3. Confirm the fault is cleared before the inverter reconnects on its own

Parts implicated

PV modulesDC cablingRCD
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.