SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)
SMA 404: Grid incident - stand-alone grid or large frequency change
Quick answerSMA 404 means Events 401 and 404 mean the inverter has disconnected from the utility grid because it detected a stand-alone (island) grid or a very large change in grid frequency. SMA asks the installer to establish that there is no power outage or work on the utility grid, to contact the grid operator if necessary, and to check the grid connection for significant short-term frequency fluctuations..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
Events 401 and 404 mean the inverter has disconnected from the utility grid because it detected a stand-alone (island) grid or a very large change in grid frequency. SMA asks the installer to establish that there is no power outage or work on the utility grid, to contact the grid operator if necessary, and to check the grid connection for significant short-term frequency fluctuations.
Likely causes
- Utility grid outage or planned work on the grid
- Islanding / stand-alone grid condition at the site
- Large step change in grid frequency
What to check
- Make sure there is no power outage or work being done on the utility grid and contact the grid operator if necessary
- Check the grid connection for significant short-term frequency fluctuations
Parts implicated
grid connection
Sources (verbatim):
- https://files.sma.de/downloads/STP3-6-3AV-40-BE-en-22.pdf (manual, retrieved 2026-11-21) p. 85
“Explanation: The inverter has disconnected from the utility grid. A stand-alone grid or a very large change in the grid frequency was detected.”
Paraphrased; verify against the manual for your exact model and serial number.