SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)
SMA 507: Temperature AC frequency - power limited by high frequency
Quick answerSMA 507 means The inverter has reduced its power output because the grid frequency is too high, in order to support grid stability. SMA advises monitoring the frequency fluctuations and, where the message appears often, requesting the grid operator's approval to change the operating parameters..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
The inverter has reduced its power output because the grid frequency is too high, in order to support grid stability. SMA advises monitoring the frequency fluctuations and, where the message appears often, requesting the grid operator's approval to change the operating parameters.
Likely causes
- Grid frequency above the permissible range
- Frequent grid frequency fluctuations at the connection point
What to check
- Check the grid frequency and observe how often fluctuations occur
- If the message appears often, ask the grid operator to approve a change of the operating parameters
- Discuss any approved change with SMA Service
Parts implicated
grid connection
Sources (verbatim):
- https://files.sma.de/downloads/STP3-6-3AV-40-BE-en-22.pdf (manual, retrieved 2026-11-21) p. 86
“Explanation: The inverter has reduced its power due to a too-high grid frequency to ensure grid stability.”
Paraphrased; verify against the manual for your exact model and serial number.