Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)

SMA 601: Grid incident - DC proportion in grid current too high

confidence: verifiedchecked 2026-11-21
Quick answerSMA 601 means The inverter has detected an excessively high proportion of direct current in the grid current and has disconnected from the utility grid. SMA tells the installer to check the grid connection for direct current and, if the message appears frequently, to ask the grid operator whether the monitoring threshold on the inverter may be raised..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

The inverter has detected an excessively high proportion of direct current in the grid current and has disconnected from the utility grid. SMA tells the installer to check the grid connection for direct current and, if the message appears frequently, to ask the grid operator whether the monitoring threshold on the inverter may be raised.

Likely causes

  • Direct current component on the AC side of the installation
  • Fault in the inverter's output stage or current control
  • Monitoring threshold not suited to the local grid

What to check

  1. Check the grid connection for direct current
  2. If the message appears frequently, contact the grid operator and ask whether the monitoring threshold can be raised

Parts implicated

AC wiringinverter
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.