Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)

SMA 6604: Self-diagnosis - overcurrent grid / overvoltage intermediate circuit

confidence: verifiedchecked 2026-11-21
Quick answerSMA 6604 means Event 6603 is 'Self-diagnosis / Overcurrent grid' and event 6604 is 'Self-diagnosis / Overvoltage intermediate circuit (SW)'. For both, SMA states that the cause must be determined by the Service and lists no field repair beyond contacting Service..
Escalation. If the fix goes beyond a non-invasive check or a software setting, or you are not sure the system is isolated, stop and call a qualified installer.

What it means

Event 6603 is 'Self-diagnosis / Overcurrent grid' and event 6604 is 'Self-diagnosis / Overvoltage intermediate circuit (SW)'. For both, SMA states that the cause must be determined by the Service and lists no field repair beyond contacting Service.

Likely causes

  • Internal hardware fault in the power stage
  • DC-link (intermediate circuit) overvoltage inside the inverter

What to check

  1. Note the event number and the inverter serial number
  2. Contact SMA Service; do not open the inverter

Parts implicated

inverter
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.