Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)

SMA 7001: Fault sensor interior temperature

confidence: verifiedchecked 2026-11-21
Quick answerSMA 7001 means Events 7001 and 7002 report 'Fault sensor interior temperature': a temperature sensor inside the inverter is defective, the inverter interrupts feed-in operation, and the cause must be determined by the Service. SMA's only measure is to contact Service..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

Events 7001 and 7002 report 'Fault sensor interior temperature': a temperature sensor inside the inverter is defective, the inverter interrupts feed-in operation, and the cause must be determined by the Service. SMA's only measure is to contact Service.

Likely causes

  • Internal temperature sensor failed or disconnected
  • Sensor harness or measurement circuit fault on the control board

What to check

  1. Note the event number and the inverter serial number
  2. Contact SMA Service; do not open the inverter to reseat the sensor

Parts implicated

temperature sensor
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.