Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)

SMA 8003: Temperature derating

confidence: verifiedchecked 2026-11-21
Quick answerSMA 8003 means The inverter has reduced its power output for more than ten minutes because of excessive temperature. SMA's measures are to clean the cooling fins and air ducts with a soft brush, ensure sufficient ventilation, keep the unit out of direct solar irradiation and respect the maximum ambient temperature..
Escalation. If the fix goes beyond a non-invasive check or a software setting, or you are not sure the system is isolated, stop and call a qualified installer.

What it means

The inverter has reduced its power output for more than ten minutes because of excessive temperature. SMA's measures are to clean the cooling fins and air ducts with a soft brush, ensure sufficient ventilation, keep the unit out of direct solar irradiation and respect the maximum ambient temperature.

Likely causes

  • Blocked or dirty cooling fins and air ducts
  • Insufficient ventilation around the enclosure
  • Ambient temperature above the permitted maximum
  • Direct solar irradiation on the inverter

What to check

  1. Clean the cooling fins on the rear of the enclosure and the air ducts on the top using a soft brush
  2. Ensure that the inverter has sufficient ventilation
  3. Ensure that the inverter is not exposed to direct solar irradiation
  4. Ensure the maximum ambient temperature is not exceeded

Parts implicated

heat sinkcooling
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.