SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)
SMA 9003: Grid parameter locked
Quick answerSMA 9003 means Changes to the grid parameters are now blocked; from this point on the installer must log in with the SMA Grid Guard code before any grid parameter can be changed. This is a status message, not a fault..
Escalation. If the fix goes beyond a non-invasive check or a software setting, or you are not sure the system is isolated, stop and call a qualified installer.
What it means
Changes to the grid parameters are now blocked; from this point on the installer must log in with the SMA Grid Guard code before any grid parameter can be changed. This is a status message, not a fault.
Likely causes
- Grid parameters have been locked after a parameter change
- Installer logged in without the Grid Guard code
What to check
- Log in with the SMA Grid Guard code before changing grid parameters
- No repair is required if no grid parameter change is intended
Parts implicated
None listed
Sources (verbatim):
- https://files.sma.de/downloads/STP3-6-3AV-40-BE-en-22.pdf (manual, retrieved 2026-11-21) p. 99
“Explanation: Changes to the grid parameters are now blocked. In order to be able to make changes to the grid parameters, from now on you must log in using the SMA Grid Guard code.”
Paraphrased; verify against the manual for your exact model and serial number.