Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)

SMA 9101: AC voltage calibration failed

confidence: verifiedchecked 2026-11-21
Quick answerSMA 9101 means An error occurred while the inverter was calibrating its AC voltage measurement, so its grid-voltage readings cannot be trusted. SMA states that the cause must be determined by the Service and gives no field repair..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

An error occurred while the inverter was calibrating its AC voltage measurement, so its grid-voltage readings cannot be trusted. SMA states that the cause must be determined by the Service and gives no field repair.

Likely causes

  • AC voltage measurement or calibration circuit fault
  • Control-board fault inside the inverter

What to check

  1. Note the event number and the inverter serial number
  2. Contact SMA Service; do not attempt a field repair

Parts implicated

inverterAC measurement
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.