SolarEdge single-phase and three-phase inverters (Europe & APAC)
SolarEdge 18x6F: AC current surge (three-phase)
Quick answerSolarEdge 18x6F means A three-phase inverter logged an AC current surge (the table lists this code group as 18x6F/70/71 for AC Current Surge and Vac surge). Check the AC connection and ask the grid operator about surge sources near the site..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
A three-phase inverter logged an AC current surge (the table lists this code group as 18x6F/70/71 for AC Current Surge and Vac surge). Check the AC connection and ask the grid operator about surge sources near the site.
Likely causes
- AC voltage/current surge on the grid
- Irregular load or large surge source near the site
What to check
- Check the AC connection to the inverter
- Ask the grid operator whether a large surge source or irregular load exists near the site
- If the grid is clean, contact SolarEdge Support
Parts implicated
AC wiring
Sources (verbatim):
- https://web.archive.org/web/20230202122919/https://knowledge-center.solaredge.com/sites/kc/files/se-inverter-installation-guide-error-codes.pdf (manual, retrieved 2026-11-21) p. 1
“AC Current Surge Vac surge Ground current surge.”
Paraphrased; verify against the manual for your exact model and serial number.