SolarEdge single-phase and three-phase inverters (Europe & APAC)
SolarEdge 2x10: Hardware error
Quick answerSolarEdge 2x10 means The inverter detected an internal hardware fault. The addendum lists this group of codes as Hardware Error with the single instruction to contact SolarEdge Support; there is no field repair procedure..
Escalation. If the fix goes beyond a non-invasive check or a software setting, or you are not sure the system is isolated, stop and call a qualified installer.
What it means
The inverter detected an internal hardware fault. The addendum lists this group of codes as Hardware Error with the single instruction to contact SolarEdge Support; there is no field repair procedure.
Likely causes
- Internal hardware failure on the control or power board
What to check
- Note the code and serial number from the status screen
- Contact SolarEdge Support; do not open the inverter
Parts implicated
inverter
Sources (verbatim):
- https://web.archive.org/web/20230202122919/https://knowledge-center.solaredge.com/sites/kc/files/se-inverter-installation-guide-error-codes.pdf (manual, retrieved 2026-11-21) p. 3
“Hardware Error Contact SolarEdge Support.”
Paraphrased; verify against the manual for your exact model and serial number.