SolarEdge single-phase and three-phase inverters (Europe & APAC)
SolarEdge 2x18: Faulty temperature sensor
Quick answerSolarEdge 2x18 means The inverter reports a faulty temperature sensor: the addendum describes it as a broken or unconnected temperature sensor and directs you to contact SolarEdge Support..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
The inverter reports a faulty temperature sensor: the addendum describes it as a broken or unconnected temperature sensor and directs you to contact SolarEdge Support.
Likely causes
- Temperature sensor disconnected or broken
- Sensor harness damaged
What to check
- Note the code and contact SolarEdge Support
- Do not open the inverter to reseat the sensor yourself
Parts implicated
temperature sensor
Sources (verbatim):
- https://web.archive.org/web/20230202122919/https://knowledge-center.solaredge.com/sites/kc/files/se-inverter-installation-guide-error-codes.pdf (manual, retrieved 2026-11-21) p. 3
“Faulty Temp. Sensor Broken or unconnected temperature sensor. Contact SolarEdge Support.”
Paraphrased; verify against the manual for your exact model and serial number.